What is a power pole construction?

A utility pole is a column or post used to support overhead power lines and various other public utilities, such as electrical cable, fiber optic cable, and related equipment such as transformers and street lights.

What are the components of a power pole?

When you look at the power poles in your neighborhood, you’re likely going to see a combination of the following:

• Primary wires.
• Insulators.
• Crossarm.
• Lightning arresters.
• Pole ground wire.
• Transformer.
• Neutral line.
• Secondary service drop.

How deep do you set a power pole?

Utility poles are buried according to a particular formula — 10 percent of the pole’s height plus two feet equals the appropriate depth of burial. A standard utility pole measures 40 feet, so a standard hole will go about 6 feet down into the ground.

How much does it cost to build a power pole?

VERY rough numbers – commonly about $5-10/LF for overhead runs (meaning new poles typically every 100-300 feet, possibly more in high tree area), plus $500-3000 per pole needed depending on length (probably about 36-40′ tall minimum for your area if not rural but can be much more in heavily treed areas, so closer to …

How many volts is a power line?

Transmission lines carry high voltage electricity, typically at 345,000 volts, over long distances between the power generation plant and customers.

How deep should a 20 foot pole be in the ground?

Dig a hole in your lawn with a shovel where you want to install the flagpole. Make the hole 3 feet deep and 1 to 2 feet wide.

How much does it cost to run a power line?

The power company will give some service lines for free—for instance, from the road to a site 100 feet away. But when you move beyond with many more poles and many more feet of wire required, then the cost can be $25 to $50 per foot.

What are the lines that run from pole to pole called?

Lines of longitude are also called meridians. Zero degrees longitude is a line which runs from the North pole to the South Pole and goes through Greenwich in London, England. This is also known as the Prime Meridian .

What is utility line construction?

Utility line construction covers the work of putting in place water, sewer mains, drainage, flood control facilities and gas pipelines, communication lines, including traffic signals and street lightings, power and transmission lines.

What are the components of an electrical pole?

Parts of an Electric Pole FUSE Protective device used to isolate the equipment from the high-voltage lines. TRANSFORMER A device that transforms one voltage level to another. SECONDARY INSULATOR A device used to insulate the lower voltage or secondary voltage wire from the pole. GROUND MOULDING A plastic or wood molding that covers the ground