How do you use Rex grip wax?

Grip waxing (Kick waxing) from start to finish: Base preparation then base wax, and finally the wax of the day

1. Mount masking tape in the both ends of the grip zone.
2. Roughen the ski base with sand paper.
3. Wipe off excess dirt.
4. Crayon a layer of Rex Base Wax.
5. Heat the wax with a heat gun or waxing iron.

How many coats of ski wax do I need?

As it cools the pores close up and seals the wax in. You then scrape the excess off. The more you absorb into the base the better the glide and the longer it lasts, hence a two or three coats is better than one.

How do you apply liquid ski wax?

To apply, spread the liquid on the glide zones of your ski base. Let dry for 10 minutes, then rub your bases with a natural cork. The friction this creates helps get the wax into the pores. As a final step, brush your bases with a nylon brush.

How long does glide wax last?

Iron on waxes penetrate the base material allowing them to be effective for eight to ten days. However, this time frame is dependent on weather conditions as very cold and dry weather breaks wax down faster.

How do you open a ski wax?

Rub the binder wax onto the kick zone, moving backwards and forwards on either side of the groove. Heat your waxing iron to 110°F and melt the wax onto the ski. Let it cool (about 30 minutes) then cork.

How long does grip wax last?

One layer of Grip Wax will last about 4-5kms, once you have corked in your Grip Wax, you can add more layers to suit how far you want to ski.

Does ski wax make you faster?

Why Waxing Works Depending on the snow conditions (like temperature and humidity), this film of water can either make your skis faster or slower. Drier snow is usually faster while wet snow can slow you down. Wax acts as a lubricant for your ski bases, filling the pores and helping your skis glide over the snow.

Does rub on wax work?

Rub-on wax: For a quick-and-easy performance bump, you can use an all-conditions rub-on wax. It won’t be nearly as effective or long lasting, though, as hot waxing your bases. It will last longer than a rub-on wax, but it won’t boost performance as much as a temperature-specific wax.

Should I get my skis waxed?

Dried out skis will run poorly, so bring them in for a hot scrape and wax to get your season started off right. Wax keeps your skis moist, but they also protect the edges from moisture. Excess moisture can cause the edges to rust, which can cause all sorts of performance and ride problems on the slopes.

Where do you apply grip wax?

For the most part, you’re only concerned with the application of grip wax in the kick zone. This is the area under the ski from about 6 to 8 inches (15 to 20 cm) in front of your foot to the heel (see illustration).